Toro Groundsmaster 4000, Operator'S Manual

Page: 28 / 88

g019500
Figure 18
1. Check/drain plug (2)
2. Remove the plug at the 3 o’clock position ( Figure
18 ).
Note:
The oil level should be at the bottom of
the check-plug hole.
3. If the oil level is low, remove the plug at the 12
o’clock position and add oil until it begins to flow
out of the hole at the 3 o’clock position.
4. Install both plugs.
Checking the Rear-Axle
Lubricant
Service Interval: Every 400 hours
The rear axle is filled with SAE 85W-140 gear lube.
The capacity is 2.4 L (80 fl oz). Visually inspect for
leaks daily.
1. Position the machine on a level surface.
2. Remove a check plug from 1 end of the axle and
ensure that the lubricant is up to the bottom of
the hole (
Figure 19 ).
Note:
If the level is low, remove the fill plug and
add enough lubricant to bring the level up to the
bottom of the check-plug holes.
g011487
Figure 19
1. Check plug 2. Fill plug
Checking the
Rear-Axle-Gearbox
Lubricant
Service Interval: Every 400 hours
The gearbox is filled with SAE 85W-140 gear lube.
The capacity is 0.5 L (16 fl oz). Visually inspect for
leaks daily.
1. Position the machine on a level surface.
2. Remove the check/fill plug from the left side of
the gear box and ensure that lubricant is up to
the bottom of the hole (
Figure 20 ).
Note:
If the level is low, add enough lubricant to
bring the level up to the bottom of the hole.
g011488
Figure 20
1. Gearbox 2. Check/fill plug
28