Toro Groundsmaster 4000, Operator'S Manual

Page: 14 / 88

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Grease the machine.
2
No parts required
–
Check the tire pressure.
3
No parts required
–
Check the fluid levels.
4
Production-year decal 1 Install the decal (CE Machines Only).
Media and Additional Parts
Description Qty. Use
Operator's Manual 1 Review before operating the machine.
Engine owner’s manual 1 Use to reference engine information.
Declaration of Conformity 1
Note:
Determine the left and right sides of the
machine from the normal operating position.
1
Greasing the Machine
No Parts Required
Procedure
Grease the machine before use; refer to Lubrication
(page 58) .
Important:
Failure to properly grease the
machine will result in premature failure of critical
parts.
2
Checking the Tire Pressure
No Parts Required
Procedure
Check the tire pressure; refer to Checking the Tire
Pressure (page 27) .
Important:
Maintain pressure in all tires to
ensure a good quality-of-cut and proper machine
performance. Do not underinflate the tires.
14