Toro Groundsmaster 3320 Series, Installation Instructions Manual

Page: 7 / 20

Figure 6
1. Hydraulic hoses 2. Protective sleeve
Note:
Make sure that the 2 hydraulic hoses are
oriented so that they point straight out the left side of
the control valve as shown in
Figure 7 . This eliminates
the chance of the hoses interfering with the fuel tank.
Figure 7
1. Hydraulic hoses
15. Install the protective sleeve over the hoses ( Figure 6 ).
Note:
The remainder of the hose installation will be
complete after you install the hopper frame.
16. Remove the drain pan from under the machine.
17. Remove the knock-out plug, under the decal in the
lower control panel (
Figure 8 and Figure 9 ).
Figure 8
1. Knock-out plug location
Figure 9
1. Knock-out plug
18. Mount the control-valve handle to the valve spool with
a clevis pin and cotter pin.
19. Mount the pivot lever to the handle with a socket-head
screw and a locknut (
Figure 10 ).
7