Engine
g297765
Figure 17
(model 31900 and 31901 shown)
1.
Cap screw
8.
Flange nut (2 each)
15.
Cap screw (8 each)
2.
Negative (-) battery cable
9.
PTO clutch stop strap
16.
Cap screw (3 each)
3.
Wire harness ground
10.
Cap screw
17.
Flat washer (3 each)
4.
Throttle cable (model 31900 and
31901 only)
11.
PTO clutch
18.
Spacer (3 each)
5.
Pump pulley
12.
Pump drive belt
19.
Snubbing washer (3 each)
6.
Drive belt idler arm
13.
Square key
20.
Flange nut (3 each)
7.
Cap screw
14.
Stub shaft
21.
Engine lift lugs
Removing the Engine
Refer to
for this procedure.
1. Remove the radiator and hydraulic fluid cooler; refer to
Radiator and Hydraulic Fluid Cooler (page 4–14)
.
2. Remove the exhaust tube; refer to
Removing and Installing the Exhaust
.
3. Disconnect the fuel supply hose from the fuel/water separator, and the fuel
return hose from the fuel tank; refer to
Fuel System (page 4–16)
.
4. Remove the fuel/water separator assembly from its support bracket.
Groundsmaster
®
3200, 3300 and 3310
Page 4–19
Engine: Service and Repairs
19240SL Rev A
Summary of Contents for Groundmaster 31900
