PTO Clutch
g314358
Figure 122
1.
PTO clutch
5.
Cap screw (2 each)
9.
Lock nut (2 each)
2.
Washer
6.
Washer (2 each)
10.
Spacer
3.
Stub shaft
7.
Stop strap
11.
Spring washer
4.
Square key
8.
Spacer (2 each)
12.
Cap screw
For PTO clutch testing and adjustment procedures, refer to
and
Adjusting the PTO Clutch (page 7–4)
.
Removing and Installing the PTO Clutch
1. Remove the PTO shaft; refer to
Removing and Installing the PTO Shaft
(page 7–19)
.
2. Record the position of the cable ties securing the wire harness near the clutch
and unplug the clutch harness connector from the machine wire harness.
3. Remove the clutch stop strap. Locate and retrieve the spacers from the
stop strap.
4. Remove the cap screw, spring washers, and the spacer that secure the
clutch to the stub shaft.
5. Slide the clutch from the stub shaft. Locate and retrieve the square key and
the washer from the stub shaft.
6. Apply anti-seize lubricant to the stub shaft and key, then install the washer
and key on the stub shaft.
7. Fit the PTO clutch onto the stub shaft.
Groundsmaster
®
3200, 3300 and 3310
Page 7–21
Chassis: Service and Repairs
19240SL Rev A
Summary of Contents for Groundmaster 31900
