Maintenance
WARNING
Failing to properly maintain the machine
could result in premature failure of machine
systems, causing possible harm to you or
bystanders.
Keep the machine well maintained and in
good working order as indicated in these
instructions.
Note:
Determine the left and right sides of the
machine from the normal operating position.
Important:
Do not tip the machine at an angle
greater than 25°. Tipping beyond 25° leads to oil
leaking into the combustion chamber and/or fuel
leaking out of the fuel-tank cap.
Important:
Refer to your engine owner’s manual
for additional maintenance procedures.
Note:
Download a free copy of the electrical or
hydraulic schematic by visiting www.Toro.com and
searching for your machine from the Manuals link on
the home page.
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or other bystanders.
Remove the key from the ignition and
disconnect the wires from the spark plugs
before you do any maintenance. Set the wires
aside so that they do not accidentally contact
the spark plugs.
Maintenance Safety
•
Before you leave the operator’s position, do the
following:
– Park the machine on a level surface.
– Move the throttle to the low-idle position.
– Disengage the cutting unit(s).
– Ensure that the traction is in neutral.
– Engage the parking brake.
– Shut off the machine and remove the key (if
equipped).
– Wait for all movement to stop.
•
Allow machine components to cool before
performing maintenance.
•
If possible, do not perform maintenance while the
machine is running. Keep away from moving parts.
•
If the engine must be running to perform a
maintenance adjustment, keep your hands, feet,
clothing, and any parts of the body away from the
cutting unit, attachments, and any moving parts.
Keep bystanders away.
•
Clean grass and debris from the cutting unit, drive,
muffler, cooling screen, and the engine to help
prevent fires. Clean up oil or fuel spills.
•
Keep all parts in good working condition. Replace
all worn, damaged, or missing parts and decals.
Keep all hardware tight to ensure that the machine
is in safe working condition.
•
Check the grass catcher components frequently
and replace them when necessary.
•
To ensure safe, optimal performance of the
machine, use only genuine Toro replacement
parts. Replacement parts made by other
manufacturers could be dangerous, and such use
could void the product warranty.
•
If major repairs are ever needed or if assistance is
desired, contact an authorized Toro distributor.
27
