Diagnostics Screen
g202794
Figure 80
1.
Left/right button
4.
Diagnostics items
2.
Down button
5.
Diagnostics menu
3.
Menu/back button
The diagnostics screen (
) lists the various states of the machine
electrical components. The diagnostics screen should be used to check the
operation of the machine switches and controls.
IMPORTANT
When using the diagnostics screen, ensure to have the machine on
kickstand to prevent unexpected machine movement as switches
and controls are moved.
Note:
Some of the component states may have description available when using
the diagnostics screen. If an arrow icon is shown on the screen, pressing the
left/right button (as indicated by the
at the bottom of the screen) will display
the description if available.
The diagnostics screen includes the following:
•
Key On
identifies that the key switch is in the R
UN
position.
•
Key Start
indicates that the key switch is in the S
TART
position or not.
Note:
The key start position can be verified in the diagnostics screen by
rotating the switch to the S
TART
position. The motor will re-initialize.
•
PBrake Latch
identifies that the parking brake latch is engaged or not.
•
EZ Turn
indicates whether the EZ turn operation is O
N
or O
FF
.
Note:
The EZ turn switch and EZ turn sensor are in series so both switch
and sensor have to be O
N
(switch O
N
with the cutting unit raised for
a turn) for the diagnostics screen to identify the EZ Turn operation as
being O
N
. If either the switch is O
FF
or the sensor is O
FF
(the cutting unit
lowered to the ground), the EZ Turn operation will be O
FF
.
•
Traction
identifies that the traction lever is engaged or not engaged.
•
Reel Enable
indicates whether the cutting unit is engaged or not engaged.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 5–29
Electrical System: InfoCenter Display
12189SL Rev E
