Toro Greensmaster 3120, Operator'S Manual, Page: 29 / 48

Lubrication
Greasing the Machine
Service Interval: Every 50 hours (Immediately after
every washing)
Lubricate the grease fittings regularly with No. 2
lithium grease.
Locate the grease fitting as follows:
•
Rear-roller-hub assembly or, if equipped with a
3-wheel-drive kit, rear-wheel-roller clutches and
external ball bearing (1) (
Figure 29 )
g005117
Figure 29
•
Steering-fork shaft (1) ( Figure 30 )
•
Steering-cylinder-rod end ( Figure 30 )
g017144
Figure 30
•
Lift-arm pivot (3) and pivot hinge (3) ( Figure 31 )
g005119
Figure 31
•
Pull-frame shaft and roller (12) ( Figure 32 )
g005120
Figure 32
•
Steering-cylinder end ( Figure 33 )
g005121
Figure 33
29