Toro GrandStand Revolution, Setup Instructions

Page: 1 / 4

Form No. 3454-491 Rev A
GrandStand ® Revolution Mower
For All Grandstand ® Revolution Mowers
Setup Instructions
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Check the tire pressure.
2
No parts required
–
Check the grass deflector.
3
Battery charger 1 Charge the batteries.
4
No parts required
–
Check the machine before delivery to
the customer (all machines).
Operator's Manual 1
Registration card 1
5
Key 2
Deliver the machine to the customer.
1
Checking the Tire Pressure
No Parts Required
Procedure
Maintain the air pressure in the rear tires at 83 to 97
kPa (12 to 14 psi).
Important:
Uneven tire pressure can cause an
uneven cut.
Note:
The front tires are semi-pneumatic tires and do
not require air-pressure maintenance.
g001055
Figure 1
© 2022—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3454-491*