Controls
Become familiar with all the controls before you start
and operate the machine.
Control Panel
g330619
Figure 4
1.
Battery-disconnect switch
6.
Key switch
2.
USB port
7.
Height-of-cut lever
3.
InfoCenter
8.
Reference bar
4.
Power-takeoff switch
(PTO)
9.
Motion-control lever
5.
Light switch
Key Switch
The key switch has 2 positions: O
N
and O
FF
.
Use the key switch to turn on or shut off the machine;
refer to
Starting the Machine (page 19)
and
Off the Machine (page 19)
.
Power-Takeoff Switch (PTO)
Use the power-takeoff switch (PTO) to engage
and disengage mower blades or start and stop
powered attachments; refer to
Mower-Blade-Control Switch (PTO) (page 20)
.
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Park Position
Move the motion-control levers outward from the
center to the P
ARK
position when exiting the machine
to engage the electric brake.
Always move the motion-control levers to the P
ARK
position when you stop the machine or leave it
unattended.
g373611
Figure 5
Light Switch
Use the light switch to illuminate and shut off the light.
InfoCenter Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics, and other information about the machine.
•
Splash screen:
shows the battery charge for a
few seconds after you move the key to the O
N
position.
g360791
Figure 6
•
Charging screen:
shows the battery charge
percentage and amperage.
g360797
Figure 7
12
