Changing the Engine Oil
Service Interval:
Every 100 hours (more often in dirty
or dusty conditions)
Note:
Dispose of the used oil at a recycling center.
1. Park the machine so that the rear is slightly lower
than the front to ensure the oil drains completely.
2. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (Figure 42).
g017889
5
1
2
3
4
6
7
Figure 42
4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the
Full
mark (Figure 43).
G008796
2
3
4
5
6
1
Figure 43
5. Start the engine and drive to a flat area. Check the
oil level again.
Changing the Engine Oil Filter
Service Interval:
Every 200 hours
Note:
Change the engine oil filter more frequently
when operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine oil filter (Figure 44).
33
Summary of Contents for GrandStand 74583
Page 64: ...Schematics g017891 COOLER Hydraulic Schematic Rev A 64...
Page 65: ...g018109 Electrical Schematic Rev A 65...
Page 66: ...Notes 66...
Page 67: ...Notes 67...