Toro GrandStand 74574, Operator'S Manual

Page: 27 / 68

Position B
Use this position when bagging ( Figure 32 ).
G012678
Figure 32
Position C
This is the full, open position ( Figure 33 ). The suggested use
for this position is as follows:
•
In tall, dense grass mowing conditions
•
In wet conditions
• Lowers the engine-power consumption
•
Allows increased ground speed in heavy conditions
G012679
Figure 33
Using the Mid-Size Weight
•
Weights are installed to improve handling, balance, and
improve performance. Weights can be added or removed
to create optimized performance under different mowing
conditions and for operator preference.
• It is recommended that weights be added or removed one
at a time until the desired handing and balance is achieved.
Note:
Contact an Authorized Service Dealer to order a
Weight Kit.
WARNING
Excessive weight changes can affect the handling
and operation of the machine. This could cause
serious injury to you or bystanders.
Make weight changes in small increments only.
Evaluate the mower after each weight change to
ensure the machine can be operated safely.
27