5
Drilling the Mower Deck
No Parts Required
Drilling the Center Baffle Support
Holes
1.
At the bottom of the mower deck, drill the 2 pilot
holes in the deck with an 8 mm (5/16 inch) drill
bit as shown in
g284195
g284196
Figure 9
1.
Pilot hole (mower deck)
2.
8 mm (5/16 inch) drill bit
2.
Remove any burrs from the holes that you
drilled.
Drilling the Baffle and Kicker
Fitting Holes
Note:
Determine the left and right sides of the
machine from the normal operating position.
1.
At the left side of the mower deck, drill the pilot
hole in the deck with a 10 mm (3/8 inch) drill bit
as shown in
.
g284199
g284200
Figure 10
1.
10 mm (3/8 inch) drill bit
2.
Pilot hole (mower deck)
2.
Remove any burrs from the holes.
3.
At the right side of the mower deck, drill the pilot
hole in the deck with a 10 mm (3/8 inch) drill bit
as shown in
.
6
