g270486
Figure 6
1.
Right belt cover
3.
Flange-head screw (left
and right belt cover)
2.
Flange (left belt cover)
3.
Remove the 2 carriage bolts and 2 locknuts that
secure the left side CE cover to the left belt
cover (
).
g270474
Figure 7
1.
Carriage bolt
3.
Left belt cover
2.
Left side CE cover
4.
Flange locknut
4.
Remove the 3 bolts that secure the left belt cover
to the deck, and remove the cover (
g270488
Figure 8
1.
Bolts
2.
Left belt cover
4
Removing the Existing
Blades
No Parts Required
Procedure
1.
Lift the machine so that you can access the
bottom of the mower deck.
2.
Remove the existing blades from the spindles;
refer to the
Operator’s Manual
for your machine.
Note:
Save the blades for use when cutting grass
in rear discharge mode.
You will use the blade bolt and washer for installing
the recycler blades in
9 Installing the Recycler Blades
(page 14)
.
5
