Problem
Possible Cause
Corrective Action
It is difficult to remove the battery pack
from the tool.
1. The battery pack/tool is new or there
is corrosion in the battery terminals
and/or the terminals on the tool.
1. Clean the terminals on the battery
pack and the tool with a dry rag. Then
apply dielectric grease to the battery
terminals; do not use any other type
of lubricant as it can damage the
terminals.
The speed lock does not hold when
engaged.
1. The speed lock screw is loose.
1. Tighten the speed lock screw by
turning the speed lock screw ¼ turn. If
the speed lock still does not hold when
engaged, turn the speed lock screw an
additional ¼ turn.
The tool is producing a beeping sound.
1. Multiple possible causes.
1. Attempt the other troubleshooting
actions, or contact an Authorized
Service Dealer.
10
Summary of Contents for Flex-Force Power System 51825T
Page 2: ......
Page 107: ...Anteckningar...
