Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Before each use or daily
• Grease the machine.
• Check the condition of the teeth and rotate or replace any that are worn or damaged.
Before storage
• Grease the machine.
• Paint chipped surfaces.
Greasing the Machine
Service Interval:
Before each use or daily
Before storage
Grease the fitting in
.
g203602
Figure 15
Grease Type: General-purpose grease
1.
Park the machine on a level surface, lower the
loader arms, and engage the parking brake (if
applicable).
2.
Shut off the engine and remove the key.
3.
Clean the grease fitting with a rag.
4.
Connect a grease gun to the fitting.
5.
Pump grease into the fitting until grease begins
to ooze out of the bearings.
6.
Wipe up any excess grease.
14
