1
FORM NO. 3319–157 Rev A
Model No. 86001
INSTALLATION
INSTRUCTIONS
Loose Parts
Note:
Use the chart below to identify parts used for assembly.
DESCRIPTION
QTY.
USE
Baffle
Bolt 3/8–16 x 1-1/4” (32 mm)
Locknut 5/16”
1
2
4
Install under mower
Recycler
blade
3
Replace standard blades on mower
Decal
2
Install on sides of mower
Installing the Recycler
Baffle
1.
Remove mower from traction unit; see traction
unit Operator’s Manual for instructions.
2.
Thoroughly clean the mower. All debris must be
removed to ensure baffle fits tightly against
mower.
3.
Repair any dents or damaged areas on the
mower. Replace any missing parts.
4.
Remove the front bolt from each of four (4)
linkage brackets (Fig. 1).
5.
Tip mower upside down and remove standard
blades from spindles.
2
1
m–2873
Figure 1
1. Bolt 3/8–16 x 1-1/4”
(32 mm)
2. Lock nut 3/8”
