g300206
Figure 11
1.
Self-tapping screw (5/16 x 3/4 inch)
4.
Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(
).
Note:
Repeat this step for the right side of the
machine.
g300207
Figure 12
5.
Insert the bent ends of the rods into the
attachment mount as shown in
and
secure the end of each rod with a washer and
hairpin cotter.
6
Installing the Latch Rod
Parts needed for this procedure:
1
Latch rod
1
Hairpin cotter
Procedure
Install the latch rod with a hairpin cotter (
).
g033027
Figure 13
1.
Hairpin cotter
2.
Latch rod
7
Assembling the Bagger Top
Parts needed for this procedure:
1
Bagger top
1
Bagger screen
Procedure
1.
Turn the bagger top over.
2.
Install the screen as shown in
and that
it slopes down toward the collection bags.
Note:
Make sure the screens snap into place
and the tabs engage the bagger top.
9
Summary of Contents for 79412
Page 20: ......
