Toro 79410, Operator'S Manual, Page: 10 / 20

g300378
Figure 12
5. Lower the bagger top onto the bags ( Figure 13 ).
g033030
Figure 13
6. Install the upper bagger tube by inserting the
curved end into the opening in the bagger top.
Note:
Ensure that the flared end with the
retention post is pointing down and froward in
preparation to be mated with the Finishing Kit.
7
Installing the Chute
Parts needed for this procedure:
1 Chute
Procedure
1. If equipped, remove the discharge cover from
the deck; refer to your machine
Operator’s
Manual .
2. Angle the metal tab at the front of the chute into
the slot in the bracket welded to the mower deck
(
Figure 14 ).
g015203
Figure 14
3. Pivot the chute back and toward the deck so
chute is flush with the mower deck (
Figure 14 ).
Note:
Ensure that the retaining hook on the
chute is out of the way so the chute opening
mounts flush to the deck.
10