Toro 79174 Installation Instructions Download Page 4

Page: 4 / 4

Installation

Removing the Right Baffle for
Side Discharge Cutting

Thoroughly clean the mower.

Remove the locknuts and Bellville washers from
the right side baffle (Fig. 5).

Note:

Only the right side baffle needs to be
removed for side discharge mowing.

Note:

Save the hardware for use when
reinstalling the baffle.

Lift the baffle and slide it out of the interlock
with the left side baffle.

For safety, install the previously removed bolts,
washers and locknuts into the open holes of the
mower, wherever hardware was removed.

POTENTIAL HAZARD

•

Open holes in the mower expose you and
others to thrown debris.

WHAT CAN HAPPEN

•

Debris thrown out of holes in the mower
can cause injury.

HOW TO AVOID THE HAZARD

•

Never operate the mower without hardware
mounted in all holes in the mower.

•

Install hardware in mounting holes when
the baffle is removed.

Summary of Contents for 79174

Page 1: ...mower Preparing the Mower 1 Remove the mower from tractor refer to Removing the Mower in Mower Operator s Manual 2 Thoroughly clean the mower All debris must be removed to ensure that the baffles and...

Page 2: ...r 3 Bolt 5 16 18 x 3 4 19mm 4 Locknut 5 16 7 9mm Installing the High lift Blades 1 Remove standard blades Fig 2 2 Holding the blade end using a rag or thickly padded glove install each high lift blade...

Page 3: ...alling the Recycler Baffles 1 Place the left side baffle inside the cutting chamber Secure it with 2 5 16 locknuts and 2 Bellville washers Fig 5 Note Concave side of Bellville washers goes toward the...

Page 4: ...the baffle and slide it out of the interlock with the left side baffle 4 For safety install the previously removed bolts washers and locknuts into the open holes of the mower wherever hardware was rem...