1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Move the motion-control levers to the N
EUTRAL
-L
OCK
position.
3.
Engage the parking brake.
4.
Shut off the engine and remove the key.
g037289
Figure 4
2
Installing the ROPS Pivot
Shoulder Bolts
Parts needed for this procedure:
2
Shoulder bolt
2
Wave washer
2
Locknut (1/2 inch)
Procedure
1.
Secure the shoulder bolt to the roll bar using a
wave washer and locknut (1/2 inch) as shown
in
2.
Repeat this procedure on the other side.
g341473
Figure 5
1.
Locknut (1/2 inch)
3.
Shoulder bolt
2.
Wave washer
9
