Installation
10
Equalize side–to–side cut by adjusting the two
carriage bolts (Fig. 18) on the mower. Check height
of blade at outside blade tips as shown (Fig. 16).
m–3459
1
Figure 18
1.
Side–to–side adjustment
bolts
Adjusting the Blade Slope for Transport
Because the attachment lift is used when the PTO
drive is engaged, blade slope in transport must be
adjusted to extend PTO drive belt life. This
adjustment also provides for adequate transport
height. Three steps accomplish this: 1) Making sure
the lift arm cams are in the same position, 2)
Measuring blade slope in its front and rear positions
and 3) Making adjustments if the blade slope is not
within specification.
IMPORTANT: Failure to adjust for blade
slope in transport can result in drive belt
failure and/or insufficient transport height.
1.
Check to see that both adjustment cams are
oriented with the indicator toward the pivot point
at the rear of the tractor (Fig. 19).
1
m–3518
2
3
4
5
6
Figure 19
Right Side of Tractor Shown
1.
Indicator
2.
Adjustment cam
3.
Lift arm
4.
Pivot point
5.
Lowers front of deck
6.
Raises front of deck
2.
If they are not, park the machine on a level
surface, set the parking brake, lower the
attachment lift to take pressure off the cams, and
turn the ignition key to “STOP” to stop the
engine. Remove the ignition key.