Toro 78357, Operator'S Manual

Page: 14 / 28

Installation
12
7. Remove the belt from around the PTO pulley
(Fig. 20). Additional belt slack can be obtained
(if needed) by turning the belt tension
adjustment knob.
m--3454
1
Figure 20
1. PTO pulley
8. Replace the grill.
9. Press the button of the mid Attach--A--Matic
t
and twist the lever clockwise to release the
mower (Fig. 21).
m--3457
1
2
Figure 21
1. Mid Attach-A-Matic
TM
button
2. Mid Attach-A-Matic
TM
lever
10. Pull the two spring--loaded J--pins from the deck
lift arms and twist them slightly so that they stay
disengaged (Fig. 22).
m--3456
1
Figure 22
1. J--pin
11. If you wish to remove the pulley box, push the
latch release buttons on the front
Attach--A--Matic
t
(Fig. 23) and raise the latch
levers to open the latches holding the pulley box.
Remove the pulley box.
m--3458
3
1
2
2
Figure 23
1. Front Attach-A-Matic
TM
button (one on each side)
2. Front Attach-A-Matic
TM
latches
3. Pulley box
12. Start the tractor and raise the attachment lift to
provide ample clearance to slide out the mower.
13. Stop the engine and remove the ignition key.
14. Slide the mower out from the driver’s right--hand
side of the tractor.