Installation
6
Installing the Mower
1.
Park the machine on a level surface, disengage
the power take off (PTO), set the parking brake,
and turn the ignition key to “OFF” to stop the
engine. Remove the key.
2.
Turn the front wheels fully to the left and raise
attachment lift lever all the way to the latched
position; refer to tractor Operator’s Manual.
3.
Slide the mower under the chassis from the right
side (Fig. 4) and align rear mounting bushings
with ends of lift arms.
4.
Turn Dial-a-Height knob counterclockwise, all
the way, and lower the attachment lift lever to
the mounting position; refer to Operation page .
5.
Place rear guide bushings, first left side then
right, onto lift arms then slide deck left into
position. Secure with 3/4” (19 mm) washers and
large hairpin cotters (Fig. 4).
6.
Attach rear link to attachment lift with 1/2”
(13 mm) washer and small hairpin cotter
(Fig. 4).
m-2445
1
3
2
5
4
7
6
Figure 4
1.
Lift arms
2.
Washer 3/4” (19 mm)
3.
Hairpin cotter-large
4.
Attachment lift
5.
Rear link
6.
Washer 1/2” (13 mm)
7.
Hairpin cotter-small
7.
Install front adjustable links to front lift arms
with washers and small hairpin cotters (Fig. 5).
m-2430
2
3
2
1
Figure 5
1.
Adjustable link
2.
Front lift arm
3.
Washer 1/2” (13 mm)
4.
Hairpin cotter-small
