Assembly
6
7.
Attach rear link to attachment lift with 1/2”
washer and 2–9/16” hairpin cotter (Fig. 2 & 4).
8.
Install both front adjustable links to front lift
arms with (2) 1/2” washers and (2) 2–9/16”
hairpin cotters (Fig. 3 & 5).
m–4246
1
2
3
Figure 5
1.
Adjustable link
2.
Washer
3.
Hairpin cotter
9.
Rotate tension lever counterclockwise to relax
spring and install mower drive belt in engine
drive pulley (Fig. 6).
10. Rotate lever clockwise to tension spring and belt
(Fig. 6).
Note:
Make sure belt is properly located in
engine and deck pulleys and around
idler pulley.
1
m–3621
2
3
Figure 6
Top View
1.
Mower belt
2.
Tension lever
3.
Idler pulley
11. Check mower level; refer to Side-to-Side Mower
Leveling page 7, and Front-to-Rear Blade
Slope page 8.
12. Raise attachment lift lever all the way to the
latched position and adjust mower height-of-cut;
refer to page 12 and transport height adjustment;
refer to page 7.
