Toro 75744, Operator'S Manual

Page: 18 / 52

Starting the Engine
Note:
A warm or hot engine may not require choking.
Important:
Do not engage the starter for more
than 5 seconds at a time. Engaging the starter
motor for more than 5 seconds can damage the
starter motor. If the engine fails to start, wait 10
seconds before operating the engine starter again.
g295541
Figure 18
Shutting Off the Engine
1. Disengage the blades by moving the
blade-control switch to the O
FF
position ( Figure
18 ).
2. Move the motion-control levers outward to the
P
ARK
position.
3. Move the throttle control to the F
AST
position.
4. Turn the key to the O
FF
position and remove
the key.
CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
Using the Motion-Control
Levers
g004532
Figure 19
1. Motion-control
lever—P
ARK
position
4. Backward
2. Center, unlocked position 5. Front of machine
3. Forward
18