Toro 75501, Operator'S Manual

Page: 30 / 40

3. Shut off the machine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Connect the charger to the charging receptacle
and rotate the plug clockwise to secure it (
Figure
35 ).
Note:
The charge plug only fits on the machine
1 way.
Note:
Ensure that the charger-voltage setting
matches the voltage at the power outlet being
used.
Note:
If the battery charger is too hot, it may
not charge properly. In cold temperatures, it may
take a longer for the battery to charge.
g369316
g341469
Figure 35
5. Plug the charger power cord into the power
outlet.
Note:
The charger light will illuminate red to
indicate a connection between the battery and
charger.
6. Allow the battery to charge.
Note:
The battery is fully charged only when
the charger light illuminates green.
7. After charging, disconnect the cord from the
power outlet.
8. Slide back the button on the plug, turn the plug
counterclockwise, and pull the plug out of the
socket (
Figure 36 ).
g341470
Figure 36
Replacing the Battery
Contact your Authorized Service Dealer for replacing
the battery.
30