Toro 74923 Z Master 6000, Operator'S Manual

Page: 51 / 68

Figure 78
1. Clutch pulley 5. Square hole in the idler
arm for the ratchet
2. Mower belt 6. Idler-grease fitting
3. Spring-loaded idler pulley 7. Belt guide
4. Ratchet
10. Install the belt guide on the idler arm ( Figure 78 ).
11. Using the ratchet in the square hole, install the idler
spring (
Figure 78 ).
Note:
Make sure that the spring ends are seated in
the anchor grooves.
12. Install the belt covers ( Figure 79 ).
Figure 79
1. Position the belt cover 3. Ensure that the tab is
under the metal catch
2. Slide the belt cover under
the side catches
51