Toro 73449 Wheel Horse 314-8, Operator'S Manual

Page: 15 / 44

Operation
13
1
m–4221
2
3
Figure 9
1. Hour meter
2. Voltmeter
3. Indicator lights
Indicator Lights
The indicator lights (Fig. 10) illuminate when certain
controls are activated and when certain conditions
occur that need immediate attention. Under normal
operating conditions the lights should be off.
Figure 10
1. Reverse mowing selected
2. PTO (power take off)
3. Engine Oil
Operating–in–Reverse
The“ reverse mowing selected” light (Fig. 10) will
illuminate whenever the “key choice” switch is used
to deactivate the operating–in–reverse interlock. It is
a reminder that the interlock system is deactivated.
The light goes out whenever the power take off (PTO)
is disengaged or the engine is shut off.
PTO (Power Take Off) Clutch
(Fig. 9) When the PTO clutch light is “ON” it
indicates the PTO clutch must be disengaged before
the engine will start.
Engine Oil
(Fig. 9) When the oil light “BLINKS” it indicates the
engine oil pressure is low. After the engine starts the
light should go out. When the engine is running if the
oil pressure drops below a safe operating level the
light “BLINKS”. Stop engine immediately and
correct the cause of low oil pressure.