Operation
•
Never run an engine in an enclosed area.
•
Only operate the machine in good light.
•
Only start the engine from the operator's position.
•
Never operate with the covers not securely in place.
•
Do not change the engine governor setting or overspeed
the engine.
•
Stop on level ground and shut off the engine before
leaving the operator's position for any reason.
•
Keep pets and bystanders away while operating the
machine.
•
Do not operate the machine under the influence of
alcohol or drugs.
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Move the engine controls in a smooth, steady motion.
•
Watch for traffic when operating on or near roadways.
•
Do not touch parts which may be hot from operation.
Allow them to cool before attempting to maintain, adjust,
or service.
•
Ensure that you operate the machine in areas where there
are no obstacles in close proximity to the operator. Only
operate the unit in areas where there is sufficient clearance
for the operator to safely maneuver the product.
•
Do not place your feet under the screed boards.
•
Lightning can cause severe injury or death. If lightning
is seen or thunder is heard in the area, do not operate
the machine; seek shelter.
Maintenance and Storage
•
Stop the engine and wait for all movement to stop before
adjusting, cleaning, or repairing the machine.
•
Clean debris from the muffler, spark arrester, and engine
to help prevent fires.
•
Let the engine cool before storing the machine, and do
not store it near an open flame.
•
Do not store fuel near flames or drain fuel from the
machine indoors.
•
Never allow untrained personnel to service the machine.
•
Do not make adjustments with the engine running.
•
Keep all parts in good working condition. Replace all
worn or damaged decals.
•
Keep all hardware of the machine tight. Keep the
machine in good condition.
•
Never tamper with safety devices.
•
When present, clean up oil or fuel spillage.
•
Use extra care when handling gasoline and other fuels.
They are flammable and vapors are explosive.
•
Store fuel in an approved container.
•
Make any necessary repairs to the machine before starting.
•
Use only genuine Toro replacement parts to ensure that
original standards are maintained.
4
