Aligning the Adjustable-End
Paddles
1.
Align the adjustable-end paddle to the mark that
you made in step
of
.
2.
Loosen the carriage bolts and flanged locknuts
that secure the adjustable end paddle to the
fixed paddle. (
)
g029044
Figure 75
1.
Carriage bolt and flanged
locknut
3.
Drum endplate
2.
Closest point of contact
3.
Adjust the position of the adjustable-end paddle
so that it is as close to the end plate as possible,
across the length of the paddle, without touching
end plate when the paddles are rotated.
4.
Torque the carriage bolts and nuts to 37 to 45
N∙m (27 to 33 ft-lb).
5.
Repeat the procedure for the adjustable end
paddle at the end plate on the other end of the
drum.
Cleaning
Cleaning the Machine
Regular cleaning and washing with mild detergent and
water increases the life span of the machine. Clean
the machine after each use before the dirt hardens.
Remove dirt and grime from the external parts of the
entire machine, especially the engine. Clean dirt and
concrete materials from the outside of the engine.
Ensure that the fuel cap and the oil-fill cap/dipstick are
secure to avoid getting water in the engine.
Use care when using a high-pressure sprayer
because it can damage the safety decals, instruction
signs, and the engine.
Important:
Lubricate the bearings and seals after
cleaning; refer to
.
48
