Toro 60213, Operator'S Manual

Page: 23 / 52

g020679
Figure 27
1. Maximum fuel level
4. Install the fuel cap securely ( Figure 26 ).
5. Wipe up any spilled fuel.
Performing Daily
Maintenance
Before starting the machine each day, perform the
Each Use/Daily procedures listed in
Maintenance
(page 27) .
Starting the Engine
1. Ensure that the clutch lever is in the O
FF
position.
2. Move the fuel valve to the O
PEN
position, all the
way to the right ( Figure 28 ).
g019815
Figure 28
1. Choke lever 3. Throttle lever
2. Fuel valve
3. Move the choke lever to the O
N
position ( Figure
28 ).
Note:
A warm or hot engine may not require
choking.
4. Move the throttle lever 1/3 of the way toward the
M
AX
position.
5. Move the engine switch to the O
N
position
( Figure 29 ).
g021103
Figure 29
1. Engine switch—O
FF
position
2. Engine switch—O
N
position
6. Pull the starter handle lightly until you feel
resistance, then pull the handle briskly (
Figure
30 ). Return the starter handle gently.
23