1
All Rights Reserved
Printed in the USA
W
1998, 2007 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
Recycler Kit
For 52” ProLine and Groundsmaster
)
Mowers
Model No. 59225
Form No. 3321–650 Rev. A
Installation Instructions
Loose Parts
Note:
Use the chart below to identify parts used for assembly.
DESCRIPTION
QTY.
USE
Kicker
Bolt 5/16–18 x 1”
Spacer
Locknut 5/16-18
3
3
3
3
Install kickers
Recycler
®
blade
3
Replace standard blades on mower
Baffle left side
Baffle right side
Bolt 5/16–18 x 5/8”
Washer 5/16”
Locknut 5/16-18
1
1
9
3
9
Install Recycler
®
baffles
Pre–Installation
1.
Remove the mower from the traction unit. Refer to the
Mower Operator Manual for instructions.
2.
Thoroughly clean the mower. All debris must be
removed to ensure the kickers and baffle will fit tightly
against the mower deck.
3.
Repair all bent or damaged areas of mower and
replace any missing parts.
Install Kickers
1.
Tip the mower upside down and block up the ends to
ease the installation of the kickers.
2.
On Groundsmaster mowers, use the dimensions shown
in figure 1 to locate, mark and drill (3) .344” dia. holes
thru the top of mower deck.
Note:
Before drilling the holes, align the kickers with the
hole marks to make sure they fit in the mower deck.
5.80
3.43
1.79
.15
6.81
6.54
Figure 1
Summary of Contents for 59225
Page 4: ......
