background image

 

6

Symbols

 

Important: 

 

This engine is equipped with a spark arrester muffler. It is a violation of California Public Resource Code 

Section 4442 to use or operate this engine without a spark arrester muffler on any forest-covered, brush-covered, or 
grass-covered land. Other states or federal areas may have similar laws.

This spark ignition system complies with Canadian ICES-002.

 

Save these instructions.

 

 Refer to them frequently and use them to instruct others who may use this product. If you 

loan someone this product, loan these instructions also.

 

Save These  Instructions

 

Symbols

 

The following symbols are located on the product. Please study them and learn their meaning. Proper interpretation of 
these symbols allows you to operate the product better and safer.

 

Symbol

Name

Explanation

 

Safety Alert

Indicates danger, warning, or caution. Attention is required in 
order to avoid serious personal injury. May be used in conjunction 
with other symbols or pictographs.

Thrown Objects

Thrown objects can cause severe injury. Wear protective clothing 
and boots.

Keep Bystanders Away

Keep all bystanders, especially children and pets, at least 50 feet 
(15 m) from the operating area.

Blade Thrust

Beware of blade thrust. Blade thrust is the sudden sideways, for-
ward, or backward motion of the product that may occur when the 
blade jams or catches on an object such as a sapling or a tree 
stump.

No Blade

Do not install any type of blade on Model No. 51930 or 51936 
and Model No. 51932 or 51938. Use only flexible, non-metallic 
line recommended by the manufacturer.

Read Operator’s Manual

Read the operator’s manual before starting or operating this prod-
uct. Failure to follow operating instructions and safety precautions 
in the operator’s manual can result in serious injury.

Eye and Ear Protection

Thrown objects can cause severe eye injury. Wear eye protection 
marked to comply with ANSI Z87.1 standards when operating 
this product. Wear hearing protection during extended periods of 
operation.

Gasoline and Oil

Use unleaded gasoline intended for motor vehicle use with an 
octane rating of 87 ([R + M] / 2) or higher.This product is pow-
ered by a 2-cycle engine and requires pre-mixing gasoline and 2-
cycle oil.

 

Summary of Contents for 51930





























Reviews: