Toro 51668, Installation Instructions

Page: 1 / 4

Form No. 3439-635 Rev A
Gutter Cleaner Kit
Ultra/UltraPlus/Super Blower/Vacuum, or Rake and Vac ™
Blower/Vacuum
Model No. 51668
Installation Instructions
Read the Operator’s Manual and follow all safety instructions.
decal133-0491
133-0491
1. Read the Operator’s Manual ; wear eye protection.
Installing the Extension
Tube Assembly
On Toro Axial Blowers
1. Shut off the machine and disconnect any power
source.
2. Remove the blower tube so that the collar can
connect directly to the blower outlet (
Figure 2 ).
3. Slide the collar over the outlet and secure it by
tightening the connection strap.
Use the small collar for 3 to 4 inch (7.6 to 10.2
cm) diameter outlets, use the large collar for 4 to
5 inch (10.2 to 12.7 cm) diameter outlets.
g320863
Figure 2
1. Blower housing outlet 3. Large universal
connection collar
2. Universal connection strap
4. Install the flex tube and extension tubes to the
collar as shown in C and E of
Figure 3 .
Installing the Extension
Tube Assembly
On Toro Blower Vacs
Important:
Tighten each extension tube over the
bumps at the end of the threads.
g038323
Figure 3
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in China
All Rights Reserved
*3439-635* A