Toro 46454, Operator'S Manual

Page: 2 / 28

WARNING
CALIFORNIA
Proposition 65 Warning
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This attachment aerates and decompacts soil. It is
intended to be used by professional, hired operators
in commercial applications. It is designed primarily
for working large areas on well-maintained lawns in
parks, golf courses, sports fields, and on commercial
grounds. Using this product for purposes other than
its intended use could prove dangerous to you and
bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com/Bullseye for product safety and
operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Bullseye parts,
or additional information, contact an Authorized
Service Dealer or Bullseye Customer Service and
have the model and serial numbers of your product
ready.
Figure 1 identifies the location of the model
and serial numbers on the product. Write the numbers
in the space provided.
g347059
Figure 1
1. Model and serial number location
Model No.
Serial No.
his manual identifies potential hazards and has safety
messages identified by the safety-alert symbol (
Figure
2 ), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
g000502
Figure 2
1. Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 3
General Safety ................................................... 3
Safety and Instructional Decals .......................... 4
Setup ........................................................................ 6
1 Removing the Attachment from the
Pallet............................................................... 6
2 Installing the Knives and Gearbox
Breather .......................................................... 7
3 Inspecting the Machine .................................... 8
Product Overview ..................................................... 9
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com/bullseye.
Printed in the USA
All Rights Reserved