Toro 46405AA, Operator'S Manual

Page: 11 / 16

Removing the Attachment
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key from the traction unit.
2. Lower the 4 storage legs.
g346767
Figure 11
1. Lynch pin 2. Storage leg
3. Lower the attachment to the ground.
4. Secure the attachment from movement.
5. Loosen the upper link jam nut and rotate the
upper link.
g345396
Figure 12
1. Upper link 3. Hairpin cotter
2. Jam nut 4. Link pin
6. Remove the upper link.
7. Remove the lower link arms.
Important:
Ensure that the attachment does
not slide off the traction unit and cannot roll
away.
g345394
Figure 13
1. Lower link arm (2) 2. Hitch pin and hairpin cotter
(2)
8. Start the traction unit and drive it away from the
attachment.
9. Install the hitch pins to the attachment and
secure them with the hairpin cotters.
g345395
Figure 14
1. Hairpin cotter (3) 2. Hitch pin (3)
Important:
When storing the attachment, do
not allow the brush to touch the ground or other
objects to avoid bending the bristles.
11