Toro 41614, Installation Instructions Manual

Page: 8 / 20

G 014247
1
2
Figure 16
1. Assembly nozzle bulkhead
2. 90° fitting
5. Move to the forward hole in the tank.
6. Install a nozzle assembly up through the drilled hole
(
Figure 17 ).
G014249
1
3
4
2
Figure 17
1. Plastic flange nut 3. Hole (previously drilled)
2. Gasket 4. Rinse-nozzle assembly
7. Install the gasket and plastic flange nut over the
exposed threads of the bulkhead on top the tank
(
Figure 17 ). Ensure that the seal is seated correctly
between the plastic nut and the tank surface.
8. Install the 90° fitting into the threaded opening of the
rinse-nozzle bulkhead (
Figure 18 ).
G014250
1
2
Figure 18
1. Assembly nozzle bulkhead 2. 90° fitting
9. Align the hose barb of the 90° fittings to the right side
of the machine.
5
Installing the Rinse-Tank
Pump
Parts needed for this procedure:
1 Rinse-tank pump
2 Straight fittings
Procedure
1. Assemble the rinse-tank pump to the tank frame on
the platform at the rear right side of the main tank as
shown in
Figure 19 .
G014251
1
2
3
4
5
Figure 19
1. Bolt 4. Tank frame
2. Washer 5. Locknut
3. Rinse-tank pump
2. Secure the rinse-tank pump to the frame using 4 bolts,
4 washers, and 4 locknuts (
Figure 19 ).
8