Figure 85
1.
Flange (pressure filter
head)
5.
Gasket
2.
Manifold (agitation valve)
6.
3-pin connector (valve
actuator—agitation valve)
3.
Flange (bypass
valve—agitation valve)
7.
Flange (master boom
valve)
4.
Clamp
2.
Remove the flanged-head bolt and flanged locknut that
secures the agitation valve to the valve mount and
remove the valve manifold from the machine (
Figure 86
1.
Flanged-head bolt
3.
Valve mount
2.
Manifold (agitation valve)
4.
Flanged locknut
Removing the Master Boom Manifold
Valve
1.
Remove clamps and gaskets that secure the manifold
for the master boom valve (
) to the master
boom bypass valve, agitation valve, and 90° flanged
elbow (at the end of the hose for the flow meter).
Note:
Retain the clamp(s) and gasket(s)for installation
in
Installing the Master Boom Manifold Valve (page
.
Figure 87
1.
Flange (bypass—master
boom valve)
5.
90° flanged elbow
2.
Flange (agitation valve)
6.
3-pin connector (valve
actuator—master boom
valve)
3.
Clamp
7.
Manifold (master boom
valve)
4.
Gasket
2.
Remove the flanged-head bolt and flanged locknut that
secures the master boom valve to the valve mount and
remove the valve manifold from the machine (
63