
The machine moves faster the farther you move
the traction-control levers from the neutral
position.
4.
To stop, position both traction-control levers in
the neutral operate position.
Driving in Reverse
1.
Move the traction-control levers to the
N
EUTRAL
/O
PERATE
position.
2.
To move rearward in a straight line, slowly move
both levers rearward with equal pressure.
g016673
Figure 20
To turn left or right, release pressure on the
traction-control lever toward the desired turn
direction.
To make zero turns, lift your foot off of the
tine-elevation switch to raise the tines. The head
raises in 1 second.
Important:
Do not make a zero turn when
the tines are in the down position.
3.
To stop, position both traction-control levers in
the N
EUTRAL
/O
PERATE
position.
Transporting the Machine
Machine weight:
460 kg (1,015 lb)
Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
the necessary brakes, lighting, and marking as
required by law. Please carefully read all the safety
instructions.
CAUTION
This machine does not have proper turn
signals, lights, reflective markings, or a
slow moving vehicle emblem. Driving on a
street or roadway without such equipment
is dangerous and can lead to accidents
causing personal injury. Driving on a street or
roadway without such equipment may also be
a violation of State laws and the operator may
be subject to traffic tickets and/or fines.
Do not drive a machine on a public street or
roadway.
To transport the machine:
1.
Raise the tines of the machine before driving
onto the trailer or truck.
2.
If using a trailer, connect it to the towing vehicle
and connect the safety chains.
3.
If applicable, connect the trailer brakes.
4.
Load the machine onto the trailer or truck.
5.
Shut off the engine, remove the key, set the
brake, and close the fuel valve.
6.
Engage the parking brake and block the tires.
7.
Use the tie-down points on the machine to
securely bind the machine to the trailer or truck
with straps, chains, cable, or ropes (
).
Note:
Refer to your local ordinances for specific
trailer and tie-down regulations.
g025949
Figure 21
1.
Tie-down points
25
Summary of Contents for 39519
Page 55: ...Schematics g020224 Electrical Diagram Rev A 55...
Page 56: ...g020225 Electrical Schematic Rev A 56...
Page 57: ...g020226 Hydraulic Diagram Rev A 57...
Page 60: ......