Toro 38701, Operator'S Manual

Page: 7 / 36

Product Overview
g325102
Figure 4
1. Wheel-clutch lever 6. Traction-drive lever
2. Broom-angle lever 7. Fuel-tank cap
3. Broom-drive lever 8. Broom and hood
4. Speed-selector lever 9. Broom-height-adjustment
pin
5. Hand bar grip
Controls
Determine the left and right sides of the machine from
the normal operating position.
Choke Control
The choke control is the top lever located on the rear,
left side of the engine above the fuel-shutoff valve
(
Figure 5 ).
The choke is used to aid in starting a cold engine.
Move the lever left to the O
N
position for a cold start.
Do not run a warm engine with the choke in the O
N
position.
g326826
Figure 5
1. Choke control 4. Recoil-start handle
2. Fuel-shutoff valve 5. Engine On/Off switch
3. Throttle control
Fuel-Shutoff Valve
Use the fuel-shutoff valve to shut off the fuel when
you will not use the machine for a few days, park the
machine inside a building, or transport the machine to
and from the job site (
Figure 5 ).
Move the lever to the left to shut off the fuel. Move the
lever to the right to turn on the fuel.
Throttle Control
The throttle control is located on the rear, right side of
the engine and below the fuel tank (
Figure 5 ).
The throttle is used to control engine speed. Moving
the throttle control to the left increases the engine
speed, and moving it right decreases the engine
speed.
Engine On/Off Switch
Located on the right side of the engine ( Figure 5 ).
Rotate the switch clockwise to the O
N
position
before starting the engine. Rotate the switch
counterclockwise to the O
FF
position to shot off the
engine.
7