Toro 38637C, Operator'S Manual

Page: 7 / 32

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
Handle bolts 4
Curved washers 4
1.
Locknuts 4
Install the upper handle.
2.
No parts required
–
Install the wheel clutch cable ends
3.
No parts required
–
Install the traction control linkage.
Carriage bolts 2
4.
Locknuts 2
Install the chute control rod.
5.
Cable tie 1 Connect the wire to the headlight.
6.
No parts required
–
Fill the engine with oil.
7.
No parts required
–
Check the tire pressure.
8.
No parts required
–
Check the skids and scraper.
9.
No parts required
–
Check the operation of the traction drive.
7