Figure 19
1.
Ignition key
4. Firmly push in the primer with your thumb 2 times
(15°F or -9°C or above) or 4 times (below 15°F or
-9°C), holding the primer in for a second before
releasing it each time (Figure 20).
Figure 20
5. Rotate the choke to the Choke position (Figure 21).
Figure 21
6. Move the throttle to the Fast position (Figure 22).
Figure 22
7. Start the snowthrower pulling the recoil starter or
pressing the electric-starter button (Figure 23).
Figure 23
1.
Electric-starter button
3.
Recoil starter
2.
Electric starter plug
Note:
To use the electric starter, connect a power
cord to the electric starter plug first and then to a
power outlet.
Important:
To prevent damaging the electric
starter, run it in short cycles (5 seconds
maximum, then wait one minute before trying to
12
Summary of Contents for 38629
Page 26: ...Notes 26 ...
