Toro 38472, Operator'S Manual

Page: 5 / 24

2
Installing the Recoil-Starter
Handle
No Parts Required
Procedure
Install the recoil-starter handle in the rope guide as shown in
Figure 4 .
Figure 4
1. Rope guide
3
Installing the Discharge Chute
Parts needed for this procedure:
1 Discharge chute
2 Screws
2 Washers
2 Locknuts
1 Knob
Procedure
Install the discharge chute as shown in Figure 5 .
Figure 5
1. Knob 2. Bolt (2), washer (2), and
locknut (2)
Note:
Install the bolts from the inside of discharge chute
assembly so that the washers and locknuts are on the outside
of the chute.
Important:
Do not overtighten the locknuts.
4
Filling the Engine with Oil
Parts needed for this procedure:
1 Bottle of engine oil
Procedure
Your machine does not come with oil in the engine, but it
does come with a bottle of oil.
Important:
Before starting the engine, fill the engine
with oil.
Max fill: 0.35 L (12 oz), type: automotive detergent oil with
an API service classification of SJ, SL, or higher.
Use Figure 6 to select the best oil viscosity for the outdoor
temperature range expected:
5