Throttle Lever
Move the control forward to increase the engine speed, and
rearward to decrease speed (
Figure 8
1.
Throttle lever
Depth-Control Lever
The depth-control lever allows you to set the depth of the
flail blades in 10 different cutting positions along with 1
position for transportation.
To adjust the depth, remove the hairpin cotter, pull the
locking pin out, and move the lever forward or rearward to
the desired depth setting (
).
Important:
Do not pull the lever side-to-side, as this
bends the lever.
1
2
3
4
g025338
Figure 9
1.
Depth-control lever
3.
Hairpin cotter
2.
Transport-position hole
4.
Locking pin
Specifications
Note:
Specifications and design are subject to change
without notice.
Width
69.9 cm (27.5 inches)
Length (operating)
111.8 cm (44 inches)
Length (with handle stored)
86.4 cm (34 inches)
Height (operating)
94 cm (37 inches)
Height (with handle stored)
63.5 cm (25 inches)
Weight
61.2 kg (135 lbs)
Attachments/Accessories
Approved attachments and accessories are available for use
with the machine to enhance and expand its capabilities.
Contact an Authorized Service Dealer or Distributor or go
to www.Toro.com for a list of all approved attachments and
accessories.
10
