Toro 322006065, Operator'S Manual

Page: 16 / 24

Drive System
Maintenance
Removing and Installing
the Wheels
Service Interval: Every 25 hours—Lubricate the
jackshaft assembly.
Remove and install the wheels as shown.
g337013
Figure 18
1. Axle nut 3. Spacer
2. Wheel 4. Lockwasher
Replacing the Drive Belt
1. Remove the 2 fasteners securing the rear of the
shield to the mower housing.
g393641
Figure 19
1. Rear fastener (2)
4. Mower head
2. Front fastener (4) 5. Drive belt
3. Shield
2. Remove the 4 fasteners securing the front of the
shield and mower head to the mower housing.
3. Raise the front of the mower housing, loosen the
mounting bolt on the drive pulley, and remove
the “V” pulley from the idler bracket.
Important:
Do not bend the belt guides.
16