Toro 31914, Operator'S Manual, Page: 27 / 44

g267691
Figure 29
1. Yoke 6. Tabs—3 o’clock position
2. Jam nut 7. Tabs—6 o’clock position
3. Speed-control crank 8. Tabs—9 o’clock position
4. Speed-control rod 9. Tabs—12 o’clock position
5. Tabs
6. Move the speed-control lever to the N
EUTRAL
position.
7. Ensure that the safety switch is pressed and
there is a 8 mm (5/16 inch) space between the
actuating tab and switch (
Figure 30 ).
8. If needed, adjust the switch location to create
the 8 mm (5/16 inch) space (
Figure 30 ).
g001517
Figure 30
1. Actuating tab 3. Safety switch
2. 8 mm (5/16 inch) space
27