Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Mount the battery charger (optional).
2
No parts required
–
Unfold the handle.
3
Chute deflector
1
Install the chute deflector.
4
Chute-control rod
1
Install the chute-control rod.
Note:
The battery pack is not fully charged when you
purchase it. Before using the machine for the first
time, refer to
Charging the Battery Pack (page 12)
.
1
Mounting the Battery
Charger (Optional)
No Parts Required
Procedure
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to
for assistance in mounting the
charger.
Slide the charger over the appropriately positioned
hardware to secure the charger in place (hardware
not included).
g247359
Figure 2
7
