Assembling the Taillights
1.
Align the taillight to the light housing with the
yellow lens positioned as shown in
.
g350575
Figure 48
1.
Yellow lens (taillight)
4.
Phillips-head screw (#10 x
1-1/4 inches)
2.
Red lens (taillight)
5.
Clip nut (#10)
3.
4-socket connector
(taillight harness)
2.
Plug the 4-socket connector of the harness into
the 4-pin connector of the taillight (
).
3.
Assemble the taillight into the light housing, and
secure the light to the housing (
) with 2
Phillips-head screws (#10 x 1-1/4 inches).
4.
Repeat steps
through
for the other taillight
and light housing.
5.
Install a pivot bracket to the light-housing mount
(
) with 3 capscrews (1/4 x 3/4 inch)
and locknuts (1/4 inch).
g351422
Figure 49
1.
Capscrew (1/4 x 3/4 inch)
3.
Pivot bracket
2.
Light-housing mount
4.
Locknut (1/4 inch)
6.
Install the mount cover to the light-housing
mount with 4 push-in fasteners (
).
g350666
Figure 50
1.
Push-in fasteners
3.
Light-housing mount
2.
Mount cover
7.
Repeat steps
and
for the other mount cover
and light assembly.
Installing the Pivot Mount
1.
At the left side of the bumper, remove the 2
capscrews (1/2 x 1-1/4 inches), 2 washers (1/2
inch), and 2 flange locknuts (1/2 inch) securing
the bumper to the left frame rail (
).
23
Summary of Contents for 31693
Page 31: ...Notes ...
Page 32: ......
