Toro 31693, Installation Instructions Manual

Page: 13 / 32

g350970
Figure 21
1. 12-pin connector (control
harness) 2. Notch (steering cover)
5. Assemble the steering cover to the cover mounts
with the 4 flange-head screws.
6. Pull the boot down and assemble the bottom of
it into the steering cover (
Figure 22 ).
g350967
Figure 22
Assembling the Fuse Mount Plate
1. Assemble the clip nut (#10) onto the fuse mount
plate (
Figure 23 ).
g350763
Figure 23
1. Clip nut (#10) 4. Flange head screw (#10 x
3/8 inch)
2. Fuse mount plate 5. Cable tie
3. Flasher
2. Assemble the flasher to the mount plate ( Figure
23 ) with a flange head screw (#10 x 3/8 inch).
3. Secure the flasher to the mount plate with a
cable tie (
Figure 23 ).
4. Plug the 12-socket connector of the console
harness into the 12-pin connector of the flasher
(
Figure 24 ).
13